Choose heating system
Dear customer. Here you can choose your heating system. Please fill the following form and use the help when needed. IF you have any difficulties feel free to email us and we will be glad to assist you.
The Carbon heating system is used for heating dry areas with wooden and laminate floors. The heating element is used directly under the flooring without cement covering, glue etc. It works only at 220-240V.
The Cable floor heating system can be used for heating dry and wet areas. The heating element is embeded in a layer of cement. There are a variiety of floor coverings for this system – tiles, marble, stone, linuleum, carpeting etc. It works at both 110-120V and 220-240V.120V or 240 V Cable floor heating system? -They heat the same and consume the same energy. The important difference is that at 240V one thermostat can control twice bigger system. So for rooms up to 150-160 sq.ft. you can use both voltages, for bigger rooms you better use 240V
Choose your existing floor which will remain under the heating system. Pay a special attention when for the floors that are outside and over cold premises. In these cases you better use a good heating insulation.
Heating Insulation under Cable floor heating
Heating Insulation under Carbon floor heating
Heating Insulation under Cable floor heating
Heating Insulation under Carbon floor heating
A new Functional model
A new Generation programmable thermostat
Carbon floor heating
Calculate the clean area which will be covered with carbon film. You don't need to place it under heavy permanent furniture like wardrobes etc. At the example room there won't be carbon film under the bed and the closet. The clean area is 85sq.ft. so that's what should be filled in the form.
The carbon heating film is 20W/sq.ft. (200W/sq.m.). That's why the maximum heated area with one thermostat is 160sq.ft. For bigger areas you need additional thermostats.
Cable floor heating
Calculate the clear area where the heating cable is placed. The clean area on the photo is 43sq.ft. – the red area.
Important: The maximum heated area for 120V is 160 sq.ft. and for 240V it is 300sq.ft.. For bigger areas you need additional thermostats.
Calculate the clean area which will be covered with carbon film. You don't need to place it under heavy permanent furniture like wardrobes etc. At the example room there won't be carbon film under the bed and the closet. The clean area is 85sq.ft. so that's what should be filled in the form.
The carbon heating film is 20W/sq.ft. (200W/sq.m.). That's why the maximum heated area with one thermostat is 160sq.ft. For bigger areas you need additional thermostats.
Cable floor heating
Calculate the clear area where the heating cable is placed. The clean area on the photo is 43sq.ft. – the red area.
Important: The maximum heated area for 120V is 160 sq.ft. and for 240V it is 300sq.ft.. For bigger areas you need additional thermostats.
Phone: +359 62 649652 GSM: +359 888 974011 e-mail: 